Saturday, September 30, 2006
High performance drives and motors from 30-750W
Lenze has extended its range of Panasonic drives and motors with the introduction of the Hyper range. The new range offers a high performance option for power outputs between 30 and 750W, with the benefit that machinery will run faster and with greater accuracy. Ideally suited to synchronised applications such as checkweighers, the Panasonic Hyper products are available as brushless geared motors and low inertia servo style motors.
The Hyper-G is a high performance geared motor with four power output between 30 and 130W, featuring efficient helical gearheads rated for constant torque up to 29Nm and extremely accurate speed holding.
The design is remarkably compact, for example, the 130W motor is only 76mm long.
Both motors and gearheads are enclosed to IP65 and rated at 10,000 hours operating life.
The compact yet dynamic Hyper-Minas is the servo variant, a range of low rotor inertia motors with IP65 enclosure at 100, 200, 400 and 750W.
Each is constructed using brushless technology, with a permanent magnet rotor featuring 8 magnetic poles and Hall effect devices that sense the rotary position.
The Hyper-Minas range of motors can also be combined with planetary gearheads.
Drives from the Hyper range are suitable for use with both geared motors and servo motors.
Supply is 230V single phase, with options at 100V and 24V (for 30 and 50W motors).
The small drive size includes a detachable keypad, up to 16 jog speeds, selectable chopping frequency and 1-24 pulse output/revolution.
The Hyper-G is a high performance geared motor with four power output between 30 and 130W, featuring efficient helical gearheads rated for constant torque up to 29Nm and extremely accurate speed holding.
The design is remarkably compact, for example, the 130W motor is only 76mm long.
Both motors and gearheads are enclosed to IP65 and rated at 10,000 hours operating life.
The compact yet dynamic Hyper-Minas is the servo variant, a range of low rotor inertia motors with IP65 enclosure at 100, 200, 400 and 750W.
Each is constructed using brushless technology, with a permanent magnet rotor featuring 8 magnetic poles and Hall effect devices that sense the rotary position.
The Hyper-Minas range of motors can also be combined with planetary gearheads.
Drives from the Hyper range are suitable for use with both geared motors and servo motors.
Supply is 230V single phase, with options at 100V and 24V (for 30 and 50W motors).
The small drive size includes a detachable keypad, up to 16 jog speeds, selectable chopping frequency and 1-24 pulse output/revolution.
# posted by Medical Information : 4:17 AM
Subscribe to Posts [Atom]
