Friday, October 06, 2006
Optimized servo motors offer high dynamics
High acceleration servo motors have been developed for high dynamic positioning applications with a high start-stop frequency.
Following Stober Drives' recent introduction of the new MDS 5000 range of servo drives they would now like to introduce two new complementing ranges of brushless servo motors the ED and EK Range. The high acceleration servo motors in the ED series have been developed for high dynamic positioning applications with a high start-stop frequency. The ED Series are available in 5 different frame sizes (55 to 192mm) with continuous torque ratings from 0.37 to 23.5Nm and peak torque ratings of 1.48 to 91Nm.
The second, short design EK motor series is intended for applications with limited axial installation conditions and high true running specifications.
The EK series are available in 2 different frame sizes (115 to 145mm) with continuous torque ratings from 1.76 to 14.10Nm and peak torque ratings of 15 to 50Nm.
Both series are available for use with absolute measuring systems.
Naturally, traditional resolvers, with their advantages in very poor environmental conditions, are also available.
In combination with digital encoders, the electronics rating plate fitted as standard in the motor helps to simplify commissioning.
All motors are CE marked as standard and can be supplied with UL certification as an option.
Standard IP56 enclosure type but upon requested can be supplied with IP66 enclosure type.
Stober also supply low backlash safety spring pressure brakes as standard on motor size ED4-ED7.
As an option backlash-free permanent magnet holding brakes are available.
Motor size ED2-ED3 and EK5-EK7 have a backlash-free permanent magnet holding brake as standard.
To increase the continuous torques and continuous outputs of the ED/EK motors, Stober can provide forced-air cooling systems (IP44).
Following Stober Drives' recent introduction of the new MDS 5000 range of servo drives they would now like to introduce two new complementing ranges of brushless servo motors the ED and EK Range. The high acceleration servo motors in the ED series have been developed for high dynamic positioning applications with a high start-stop frequency. The ED Series are available in 5 different frame sizes (55 to 192mm) with continuous torque ratings from 0.37 to 23.5Nm and peak torque ratings of 1.48 to 91Nm.
The second, short design EK motor series is intended for applications with limited axial installation conditions and high true running specifications.
The EK series are available in 2 different frame sizes (115 to 145mm) with continuous torque ratings from 1.76 to 14.10Nm and peak torque ratings of 15 to 50Nm.
Both series are available for use with absolute measuring systems.
Naturally, traditional resolvers, with their advantages in very poor environmental conditions, are also available.
In combination with digital encoders, the electronics rating plate fitted as standard in the motor helps to simplify commissioning.
All motors are CE marked as standard and can be supplied with UL certification as an option.
Standard IP56 enclosure type but upon requested can be supplied with IP66 enclosure type.
Stober also supply low backlash safety spring pressure brakes as standard on motor size ED4-ED7.
As an option backlash-free permanent magnet holding brakes are available.
Motor size ED2-ED3 and EK5-EK7 have a backlash-free permanent magnet holding brake as standard.
To increase the continuous torques and continuous outputs of the ED/EK motors, Stober can provide forced-air cooling systems (IP44).
# posted by Medical Information : 2:54 AM
Subscribe to Posts [Atom]
