Friday, December 01, 2006
Siemens Simatic now includes motor starters
Siemens Automation and Drives (A and D) has expanded the Simatic ET 200pro distributed I/O system for 'control cabinet free' installation to include motor starters. Setting options of up to 5.5 kilowatts make it possible to cover a wide range of applications with only a few device versions. The Simatic ET 200pro motor starters, which are available as line starters and reversing starters, have extensive diagnostics options as well as electronic overload protection.
They are also available with optional brake control.
Switching status and motor starter status are displayed via bus and LED.
Motors and loads up to 5.5 kilowatts are connected directly to the new motor starters, which in turn are connected to the Simatic ET 200pro distributed I/O system for integration in the Profibus or Profinet communications network.
The motor starters have IP65 protection and are suitable for 'control cabinet free' installation and use directly on the machine, at the local level.
The motor starters are available as line starters and reversing starters, each in a 'Standard' and a 'High Feature' version.
The 'High Feature' version of both starters is additionally equipped with four parameterisable digital inputs.
Special modules such as a 'repair switch module' which separates downstream starters from the mains or serves as additional short-circuit protection (group fusing) for the downstream loads round off the new line.
The local safety motor starter solution is used for safety-relevant applications.
It consists of a local safety repair switch module with parameterisable start and safe input as well as a 400V shut-off module.
These components enable a safe shut-down up to Cat 4/SIL 3.
The Simatic ET 200pro motor starters are integrated in the Simatic STEP7 engineering software.
With STEP7, the motor starters can be very easily configured and parameterised as both Profibus and Profinet nodes.
A wide variety of potential groups can be formed and different loads interfaced by means of the flexible connection system on the 400 volt load side.
They are also available with optional brake control.
Switching status and motor starter status are displayed via bus and LED.
Motors and loads up to 5.5 kilowatts are connected directly to the new motor starters, which in turn are connected to the Simatic ET 200pro distributed I/O system for integration in the Profibus or Profinet communications network.
The motor starters have IP65 protection and are suitable for 'control cabinet free' installation and use directly on the machine, at the local level.
The motor starters are available as line starters and reversing starters, each in a 'Standard' and a 'High Feature' version.
The 'High Feature' version of both starters is additionally equipped with four parameterisable digital inputs.
Special modules such as a 'repair switch module' which separates downstream starters from the mains or serves as additional short-circuit protection (group fusing) for the downstream loads round off the new line.
The local safety motor starter solution is used for safety-relevant applications.
It consists of a local safety repair switch module with parameterisable start and safe input as well as a 400V shut-off module.
These components enable a safe shut-down up to Cat 4/SIL 3.
The Simatic ET 200pro motor starters are integrated in the Simatic STEP7 engineering software.
With STEP7, the motor starters can be very easily configured and parameterised as both Profibus and Profinet nodes.
A wide variety of potential groups can be formed and different loads interfaced by means of the flexible connection system on the 400 volt load side.
# posted by Medical Information : 1:19 AM
Subscribe to Posts [Atom]
